SAHNOUN

https://neoma-bs.com/sites/default/files/uploaded_images/profs-neoma_0.png

SAHNOUN

Qualification in section 61 of the CNU, Engineering, Supply-Chain, logistics, operations and purchasing

SAHNOUN, M., B.BETTAYEB, S.-J.BASSETTO, M.TOLLENAERE, "Simulation-based optimization of sampling plans to reduce inspections while mastering the risk exposure in semiconductor manufacturing", Journal of Intelligent Manufacturing, 2016, vol. 27, no. 6, pp. 1335-1349

10.1007/s10845-014-0956-x

BETTAYEB, B., S.BASSETTO, M.SAHNOUN, "Quality control planning to prevent excessive scrap production", Journal of Manufacturing Systems, 2014, vol. 33, no. 3, pp. 400-411

10.1016/j.jmsy.2014.01.001

BENATIA, M. A., M.SAHNOUN, D.BAUDRY, A.LOUIS, A.EL-HAMI, B.MAZARI, "Multi-Objective WSN Deployment Using Genetic Algorithms Under Cost, Coverage, and Connectivity Constraints", Wireless Personal Communications, 2017, vol. 94, no. 4, pp. 2739-2768

10.1007/s11277-017-3974-0

ZAIDI, L., B. BETTAYEB, M. SAHNOUN, "Optimisation and Simulation of Transportation Tasks in Flexible Job Shop with Muti-Robot Systems" in 1st International Conference On Cyber Management And Engineering (CyMaEn), 2021, France DOI : 10.1109/CyMaEn50288.2021.9497283
BAILLY, A., H. TLAHIG, B. BETTAYEB, M. MESSAADIA, M. SAHNOUN, "Human’s New Roles to Ensure Resilience of Industrial Cyber-Physical Systems" in 2020 IEEE Conference on Industrial Cyberphysical Systems (ICPS), 2020, Tampere, Finland DOI : 10.1109/ICPS48405.2020.9274775

SAHNOUN, M., Y.XU, F.BEN ABDELAZIZ, D.BAUDRY, "Optimization of Transportation Collaborative Robots Fleet Size in Flexible Manufacturing Systems" in 8th International Conference on Modeling Simulation and Applied Optimization (ICMSAO), 2019
XU, Y., M.SAHNOUN, M.MAZAR, F.BEN ABDELAZIZ, A.LOUIS, "Packaged Bio-Waste Management Simulation Model Application: Normandy Region, France" in 8th International Conference on Modeling Simulation and Applied Optimization (ICMSAO), 2019
SAHNOUN, M., Y.XU, F.BEN ABDELAZIZ, D.BAUDRY, "Optimization of Transportation Collaborative Robots Fleet Size in Flexible Manufacturing Systems" in ICMSAO 2019 - 8th International Conference on Modeling, Simulation and Applied Optimization, IEEE, pp. 1-5, 2019, Bahrain, Bahrain

BENATIA, M. A., F. BEN ABDELAZIZ, M. SAHNOUN, "Energy savings and coverage optimization in edge WiFi sensor deployment for buildings: A multi-objective evolutionary approach", Energy Economics, January 2025, vol. 141, pp. 108096 DOI : 10.1016/j.eneco.2024.108096
XU, Y., F. BEN ABDELAZIZ, M. SAHNOUN, A. LOUIS, "Optimized cooperative vehicle routing in multi-depot collection systems for circular economy: Model development and case study", Journal of Cleaner Production, January 2025, vol. 486, pp. 144417 DOI : 10.1016/j.jclepro.2024.144417
XU, Y., M. SAHNOUN, F. BEN ABDELAZIZ, A. LOUIS, "Multimodal transportation network for bio-waste collection: the case of Normandy", Annals of Operations Research, September 2024 DOI : https://doi.org/10.1007/s10479-024-06218-8
BRIK, B., M. MESSAADIA, M. SAHNOUN, B. BETTAYEB, M. A. BENATIA, "Fog-supported low-latency monitoring of system disruptions in industry 4.0: A federated learning approach", ACM Transactions on Cyber-Physical Systems, May 2023, vol. 6, no. 2, pp. 1-23 DOI : https://doi.org/10.1145/3477272
BELLAL, S. E., L. H. MOUSS, M. SAHNOUN, M. MESSAADIA, "User behaviour-based approach to define mobility devices needs of disabled person in Algeria: a questionnaire study", Disability and Rehabilitation: Assistive Technology, March 2022, vol. 17, no. 4, pp. 453-461 DOI : 10.1080/17483107.2020.1791263
MAZAR , M., M. SAHNOUN, B. BETTAYEB, N. KLEMENT, A. LOUIS, "Simulation and optimization of robotic tasks for UV treatment of diseases in horticulture", Operational Research An International Journal, March 2022, vol. 22, no. 1, pp. 49-76
XU, Y., M. SAHNOUN, F. BEN ABDELAZIZ, D. BAUDRY, "A simulated multi-objective model for flexible job shop transportation scheduling", Annals of Operations Research, April 2022, vol. 311, no. 2, pp. 899-920
BRAHAMI, M. A., M. DAHANE, M. SOUIER, M. SAHNOUN, "Sustainable capacitated facility location/network design problem: a Non-dominated Sorting Genetic Algorithm based multiobjective approach", Annals of Operations Research, May 2022, vol. 311, pp. 821–852 DOI : https://doi.org/10.1007/s10479-020-03659-9
BRIK, B., M. MESSAADIA, M. SAHNOUN, B. BETTAYEB, M. A. BENATIA, "Fog-supported Low Latency Monitoring of System Disruptions in Industry 4.0: A Federated Learning Approach", ACM Transactions on Cyber-Physical Systems, January 2022 DOI : 10.1145/3477272
BEZZAOUCHA, F. S., M. SAHNOUN, S. M. BEN SLIMANE, "Multi-component modeling and classification for failure propagation of an offshore wind turbine.", International Journal of Energy Sector Management, February 2021, vol. 15, no. 2, pp. 397-420 DOI : https://doi.org/10.1108/IJESM-10-2019-0020
MOUSSA , S., B. BETTAYEB, M. SAHNOUN, F. DUVAL, A. BENSRHAIR, "Modular mobile manipulators coalition formation through distributed transportation tasks allocation", Proceedings of Institute of Mechanical Engineers Part B: Journal of Engineering Manufacture, December 2021, vol. 235, no. 14, pp. 2262–2272
ABDELLAOUI, W., M. SOUIERA, M. SAHNOUN, F. BEN ABDELAZIZ, "Multi-period optimal schedule of a multi-product pipeline: A case study in Algeria", Computers and Industrial Engineering, September 2021, vol. 159 DOI : 10.1016/j.cie.2021.107483
ALLAL, A., M. SAHNOUN, R. ADJOUDJ, S. M. BENSLIMANE, M. MAZAR, "Multi-agent based simulation-optimization of maintenance routing in offshore wind farms", Computers and Industrial Engineering, July 2021, vol. 157, pp. 107342 DOI : 10.1016/j.cie.2021.107342
MAZAR, M., M. SAHNOUN, B. BETTAYEB, N. KLEMENT, A. LOUIS, "Simulation and optimization of robotic tasks for UV treatment of diseases in horticulture", Operational Research An International Journal, March 2021
BRAHAMI , M. A., M.SOUIER, M.DAHANE, M.SAHNOUN, "Sustainable capacitated facility location/network design problem: a Non-dominated Sorting Genetic Algorithm based multiobjective approach", Annals of Operations Research, May 2020
HAVARD, V., M. SAHNOUN, B. BETTAYEB, F. DUVAL, D. BAUDRY, "Data architecture and model design for Industry 4.0 components integration in cyber-physical production systems", Proceedings of Institute of Mechanical Engineers Part B: Journal of Engineering Manufacture, December 2020, pp. 095440542097946 DOI : 10.1177/0954405420979463
BENATIA, M. A., M.SAHNOUN, D.BAUDRY, A.LOUIS, A.EL-HAMI, B.MAZARI, "Multi-Objective WSN Deployment Using Genetic Algorithms Under Cost, Coverage, and Connectivity Constraints", Wireless Personal Communications, 2017, vol. 94, no. 4, pp. 2739-2768 DOI : 10.1007/s11277-017-3974-0
DAHANE, M., M.SAHNOUN, B.BETTAYEB, D.BAUDRY, H.BOUDHAR, "Impact of spare parts remanufacturing on the operation and maintenance performance of offshore wind turbines: a multi-agent approach", Journal of Intelligent Manufacturing, 2017, vol. 28, no. 7, pp. 1531-1549 DOI : 10.1007/s10845-015-1154-1
SAHNOUN, M., B.BETTAYEB, S.-J.BASSETTO, M.TOLLENAERE, "Simulation-based optimization of sampling plans to reduce inspections while mastering the risk exposure in semiconductor manufacturing", Journal of Intelligent Manufacturing, 2016, vol. 27, no. 6, pp. 1335-1349 DOI : 10.1007/s10845-014-0956-x
MESSAADIA, M., D.BAUDRY, A.LOUIS, S.MAHDIKHAH, R.EVANS, J.GAO, T.PAQUET, M.SAHNOUN, B.MAZARI, "PLM adoption in SMEs context", Computer-Aided Design and Applications, 2016, vol. 13, no. 5, pp. 618-627 DOI : 10.1080/16864360.2016.1150706
BETTAYEB, B., S.BASSETTO, M.SAHNOUN, "Quality control planning to prevent excessive scrap production", Journal of Manufacturing Systems, 2014, vol. 33, no. 3, pp. 400-411 DOI : 10.1016/j.jmsy.2014.01.001